When on-site inspections reveal significant soil instability at depth, we utilize helical piers to provide permanent structural stabilization for your garage. Unlike surface-level repairs, these piers reach deep into the ground to anchor your foundation to stable load-bearing strata.
Our process for stabilizing a sinking garage foundation includes:
As specialists in helix/helical pier systems since 1996, we recommend this method for heavily loaded structures or cases of severe foundation failure. Please note that a definitive diagnosis and design recommendations should be provided by a licensed structural engineer, and an on-site inspection is required to confirm the appropriate solution for your specific site conditions.
Crushing concrete that contains rebar is a specialized process that involves heavy machinery designed to separate metal from masonry. This allows for effective concrete recycling where both the steel and the aggregate can be repurposed.The process follows these key steps:Material…
Solving yard drainage problems requires a systematic approach that addresses both surface runoff and subsurface groundwater. According to the guide, you can implement several targeted solutions:Improve Surface Grading: Establish a positive slope of at least 5% (about 1/2 inch of…
Installing landscape drainage correctly requires a multi-layered approach that addresses both surface runoff and subsurface groundwater. Following these systematic steps will help protect your foundation and prevent property damage:Conduct an Assessment: Before digging, evaluate your yard’s slope and soil. Use…
Installing a floor stabilizer post kit (also known as a jack post) is a structured process designed to reinforce sagging beams. However, the effectiveness of the installation depends entirely on the condition of the concrete slab and the underlying soil.According…
To effectively fix drainage problems in your yard, you should implement a combination of surface and subsurface solutions to redirect water away from your foundation.### 1. Improve Surface Grading Establish a positive slope of at least 5% (roughly ½ inch…