How does Icc-es Ac358 Address the Corrosion Protection of Steel Helical Piles in Different Soil Types?

ICC-ES AC358 addresses the corrosion protection of steel helical piles by establishing specific mandates for material thickness and coatings based on three distinct soil corrosivity categories. These requirements ensure the structural integrity and long-term durability of the foundation in various environmental conditions.

The protection strategies for each category include:

Non-aggressive Soils: These are baseline conditions with moderate pH levels. The criteria require a minimum steel thickness of 0.25 inches (6.4 mm). Galvanizing is not required, and standard paint is considered acceptable.
Aggressive Soils: Characterized by high chloride content or acidic conditions, these require a minimum steel thickness of 0.375 inches (9.5 mm). They must be hot-dip galvanized per ASTM A123. Additional protection, such as an epoxy coating or a sacrificial anode, may also be used.
Extremely Aggressive Soils: These require the highest level of defense, including a minimum steel thickness of 0.5 inches (12.7 mm). In addition to hot-dip galvanizing, an extra protective layer is required, and cathodic protection is recommended.

By following these thresholds, the AC358 standard ensures that helical piers resist section loss over time, preserving the load path from the structure to the bearing stratum.

Understanding ICC-ES AC358: A Simple Breakdown

Related FAQs

What is Included in a Professional Structural Forensic Report?

A professional structural forensic report, prepared by a licensed Professional Engineer (PE), is a comprehensive diagnostic document that identifies the root causes of foundation distress. Unlike a basic contractor walkthrough, this report is based on empirical data collection and structural…
Read More »: What is Included in a Professional Structural Forensic Report?
What Factors Influence Helical Pier Installation Prices for Foundation Repair?

The cost of helical pier installation is influenced by several site-specific and technical variables. Because no two properties have identical ground conditions or structural needs, pricing is typically determined through custom quotes rather than flat rates. Key factors influencing the…
Read More »: What Factors Influence Helical Pier Installation Prices for Foundation Repair?
What Astm Standards Apply to Commercial Helical Piers?

The manufacturing, testing, and installation of commercial helical piers are governed by several specific ASTM International standards to ensure structural integrity and predictable performance. These include:ASTM F3143-18: This serves as the primary standard for commercial helical piles, establishing minimum requirements…
Read More »: What Astm Standards Apply to Commercial Helical Piers?
What are the Top Causes of House Foundation Problems?

Based on the provided content, there are eight primary causes of foundation failure and structural distress:Poor Drainage and Water Accumulation: This occurs when water pools near the foundation due to improper grading, clogged gutters, or short downspout extensions, which can…
Read More »: What are the Top Causes of House Foundation Problems?
What are the Load Capacities of Commercial Helical Piles?

The load capacities for commercial helical piles are determined through a systematic combination of engineering analysis and real-time installation data. Rather than a single fixed value, capacity is verified using the following methods:Torque-to-Capacity Correlation: During installation, rotary equipment records the…
Read More »: What are the Load Capacities of Commercial Helical Piles?

Blog Detail