Yes, it is possible to lift a sinking garage foundation back to its original level using Polyurethane Foam Lifting. This method is a highly effective, non-invasive solution for correcting persistent slab settlement without the need for a full replacement.
Our process involves several specific steps to ensure a stable result:
In cases where the underlying soil is significantly unstable or the structure is heavily loaded, we may also recommend Helical Piers. These galvanized steel piers are screwed into stable soil layers to provide immediate load-bearing support and permanent stabilization.
Every project requires an on-site inspection to confirm the specific cause of settlement and determine the best repair method for your site conditions. Estimates and quotes are preliminary and are not legally binding until confirmed in writing following this inspection.
Foundation repair pricing in the Denver metro area and the Front Range is primarily influenced by the region’s unique geology and specific project requirements. Because costs are often higher than national averages, homeowners should consider the following key factors: Soil…
In Colorado, basement walls typically bow inward during wet seasons due to a combination of aggressive soil conditions and hydrostatic pressure. The primary factors include:Expansive Clay Soils: Much of the Colorado Front Range sits on soil rich in bentonite clay.…
Horizontal basement wall cracks are a serious structural red flag indicating that the foundation wall is bowing inward under external stress. Unlike vertical cracks caused by minor concrete shrinkage, horizontal cracks are primarily caused by the following factors:Hydrostatic Pressure: This…
A typical floor stabilizer post kit, also commonly referred to as a jack post or adjustable steel post, generally has a load capacity ranging from 5,000 to 12,000 pounds.However, the effective capacity of the system is not determined by the…
To fix a leaking foundation crack from the inside, the most professional and effective method is epoxy injection. This technique is specifically designed for non-moving structural cracks caused by concrete shrinkage, minor settlement, or thermal changes.The process involves the following…