When should I Use Push Piers Instead of Helical Piers?

While helical piers are often preferred in the Colorado Front Range due to their speed and performance in expansive clay, push piers remain a viable and time-tested solution for specific scenarios.

According to the provided guide, you should consider using push piers when:

Heavy Commercial Loads are Present: Push piers are often better suited for very heavy commercial applications compared to standard residential loads.
Deep Excavation is Already Planned: If your project site already involves planned deep excavation, installing push piers can be a practical choice.
Sites Feature Stable, Compact Soils: Push piers can be particularly cost-effective in sites with compact, shallow soils where the pier can be driven to refusal at competent bearing strata.
Historic Renovations Require Specific Support: They are sometimes preferred for historic renovations that require minimal soil disturbance below grade.
Compression Loads are High: This method is effective when stable soils are available to support high compression loads through end-bearing capacity.

However, it is important to note that push pier installation typically involves a slower timeline because it requires excavation and concrete curing. For a definitive diagnosis, you should consult a licensed structural engineer to evaluate your specific site conditions and load requirements.

Push Piers vs Helical Piers: Denver Comparison Guide

Related FAQs

What is Included in a Professional Structural Forensic Report?

A professional structural forensic report, prepared by a licensed Professional Engineer (PE), is a comprehensive diagnostic document that identifies the root causes of foundation distress. Unlike a basic contractor walkthrough, this report is based on empirical data collection and structural…
Read More »: What is Included in a Professional Structural Forensic Report?
What Factors Influence Helical Pier Installation Prices for Foundation Repair?

The cost of helical pier installation is influenced by several site-specific and technical variables. Because no two properties have identical ground conditions or structural needs, pricing is typically determined through custom quotes rather than flat rates. Key factors influencing the…
Read More »: What Factors Influence Helical Pier Installation Prices for Foundation Repair?
What Astm Standards Apply to Commercial Helical Piers?

The manufacturing, testing, and installation of commercial helical piers are governed by several specific ASTM International standards to ensure structural integrity and predictable performance. These include:ASTM F3143-18: This serves as the primary standard for commercial helical piles, establishing minimum requirements…
Read More »: What Astm Standards Apply to Commercial Helical Piers?
What are the Top Causes of House Foundation Problems?

Based on the provided content, there are eight primary causes of foundation failure and structural distress:Poor Drainage and Water Accumulation: This occurs when water pools near the foundation due to improper grading, clogged gutters, or short downspout extensions, which can…
Read More »: What are the Top Causes of House Foundation Problems?
What are the Load Capacities of Commercial Helical Piles?

The load capacities for commercial helical piles are determined through a systematic combination of engineering analysis and real-time installation data. Rather than a single fixed value, capacity is verified using the following methods:Torque-to-Capacity Correlation: During installation, rotary equipment records the…
Read More »: What are the Load Capacities of Commercial Helical Piles?

Blog Detail