When should I Use Push Piers Instead of Helical Piers?

While helical piers are often preferred in the Colorado Front Range due to their speed and performance in expansive clay, push piers remain a viable and time-tested solution for specific scenarios.

According to the provided guide, you should consider using push piers when:

Heavy Commercial Loads are Present: Push piers are often better suited for very heavy commercial applications compared to standard residential loads.
Deep Excavation is Already Planned: If your project site already involves planned deep excavation, installing push piers can be a practical choice.
Sites Feature Stable, Compact Soils: Push piers can be particularly cost-effective in sites with compact, shallow soils where the pier can be driven to refusal at competent bearing strata.
Historic Renovations Require Specific Support: They are sometimes preferred for historic renovations that require minimal soil disturbance below grade.
Compression Loads are High: This method is effective when stable soils are available to support high compression loads through end-bearing capacity.

However, it is important to note that push pier installation typically involves a slower timeline because it requires excavation and concrete curing. For a definitive diagnosis, you should consult a licensed structural engineer to evaluate your specific site conditions and load requirements.

Push Piers vs Helical Piers: Denver Comparison Guide

Related FAQs

How Much do Helical Piers Cost per Foot Installed?

Rocky Mountain Steel Piering does not publish a flat per-foot rate for helical pier installation. Because every property in the Denver Metro and Front Range region has unique subsurface conditions, costs are provided through custom quotes following a thorough on-site…
Read More »: How Much do Helical Piers Cost per Foot Installed?
How Much does Epoxy Injection Crack Repair Cost per Linear Foot?

The cost for epoxy injection crack repair typically ranges from $75 to $150 per linear foot. This method is a structural restoration solution used to bond cracks back to their original strength, particularly for dry hairline to moderate vertical or…
Read More »: How Much does Epoxy Injection Crack Repair Cost per Linear Foot?
How can I Verify if a General Contractor is Licensed and Insured in Colorado?

When hiring general contractors in Colorado for structural or foundation work, it is essential to verify their credentials to protect your financial investment and ensure project safety. Verification should include the following:License Validation: You must confirm that the contractor is…
Read More »: How can I Verify if a General Contractor is Licensed and Insured in Colorado?
What is the Difference between Sinkhole Coverage and Catastrophic Ground Cover Collapse?

The difference between sinkhole insurance coverage and catastrophic ground cover collapse depends primarily on the severity of the damage and the specific triggers required for a claim to be approved.According to the provided content, the key distinctions include:Cause and Trigger:…
Read More »: What is the Difference between Sinkhole Coverage and Catastrophic Ground Cover Collapse?
What is the Difference between Catastrophic Ground Cover Collapse and Sinkhole Loss Coverage at Tower Hill?

At Tower Hill Insurance, the difference between sinkhole loss and catastrophic ground cover collapse is defined by the severity, timing, and specific triggers of the damage as outlined by Florida law:Sinkhole Loss: This coverage focuses on structural damage caused by…
Read More »: What is the Difference between Catastrophic Ground Cover Collapse and Sinkhole Loss Coverage at Tower Hill?

Blog Detail