Based on standards set by the American Society of Civil Engineers (ASCE), the general tolerance for floor slope in a home is 1 inch in 10 feet. If a floor’s slope exceeds this measurement, it warrants a professional evaluation by a licensed structural engineer to determine if a structural failure has occurred.
For homeowners performing their own initial checks, a slope of more than one inch over a four-foot span using a level is also considered a sign that further investigation is necessary.
It is important to distinguish between:
If you suspect significant movement, document measurements in multiple rooms periodically and consult a licensed structural engineer for a definitive diagnosis and measurement against acceptable tolerances.
A constantly running sump pump is a strong indicator that your drainage system is under significant stress and may be struggling to manage a basement perimeter drain system failure. A sump pump is designed to actively remove groundwater that would…
When a weeping tile (or perimeter drain system) fails due to a clog or collapse, it can no longer provide essential hydrostatic pressure relief. This leads to several distinct warning signs: Failures typically occur when sediment and fine debris accumulate…
Yes, Foundation Repair can fix doors that will not latch or close properly when the root cause is structural settlement. In our experience serving Colorado since 1996, we find that as a foundation shifts, the home’s framing torques out of…
While both humidity and foundation issues can cause operation problems, the key lies in whether the sticking is temporary or persistent. In Colorado, seasonal humidity often causes wood frames to expand and contract. If your windows bind during wet spring…
When interior doors suddenly begin sticking at the top corner, it is often a sign that the home’s foundation is shifting. In the Denver metro area, our expansive clay soils are a primary culprit; these soils swell when wet and…